Products

Domino Plasmoid

€ 8.290

Automatic Stair Climbing Trolley for transporting loads up to 400 kg / 881 Lb Extremely easy and safe to use, suitable for transport on indoor and outdoor stairs and sloped floors, including unfinished ones. Domino Plasmoid Stabilized, the version with stabilizing arm, represents the highest technology available on the market. It is equipped with step detection sensors, allowing the stabilizing arm to always maintain contact with the floor. Can rotate in very tight spaces. Suitable for transporting a wide variety of loads up to 2 metres / 78 Inch in height. Standard equipment included: Nr 1 strap to secure the load, Nr 1 battery pack Nr 1 automatic battery charger Nr 1 standard base width 50 cm x 62 cm depth. More info

Skipper Plasmoid

€ 8.680

Tracked Stair Climber ideal for tall loads. It has independent non-marking tracks suitable for indoor and outdoor operations. The end user is not physically involved during the transport because the weight is always on the stairs; furthermore it’s possible to accomplish 360 degrees rotations also on tight landings and helical staircases. If you’re facing ceiling problems on stairs, Skipper Plasmoid is the solution. Standard equipment included: Nr.1 Strap to secure the load Nr.1 Battery charger Nr.1 Standard base 40 cm (15 inches) wide and 25 cm (9.8 inches) long More info

Domino People

€ 8.990

Tracked Stair Climbing Trolley for electronic and manual wheelchairs. Load-bearing capacity of 400 kg / 881 Lb. Domino People is equipped with a wheeled base and extendible and extensible ramps that can accommodate basically any type of wheelchair on the market. The wheelchair inclines automatically on the stairs and the operator has a joystick to control crawler track steering. Standard equipment included: Fastening straps to tie the wheelchair,  Nr 1 battery pack, Nr 1 automatic battery charger,  Nr 1 wheelchair loading platform Standard dimensions width 70 cm, depth 87.5 cm. Possibility for customisation for different requirements. More info

Photocopier base with wheels

€ 980

Base for photocopiers adjustable in width up to 80 cm / 31 Inch and in length up to 70 cm / 27 Inch. Equipped with wheels for better and more comfortable handling on flat surfaces, it also has detachable ramps for loading the photocopiers. It adapts to most photocopiers on the market and has a 400 kg / 881 Lb load capacity. It applies to Domino Plasmoid and Domino Automatic only.

Photocopier base

€ 860

Base for photocopiers adjustable in width up to 80 cm / 31 Inch and in length up to 70 cm / 27 Inch, equipped with detachable ramps for loading the photocopiers. It adapts to most photocopiers on the market and has a 400 kg / 881 Lb load capacity. It applies to Domino Plasmoid only.

Adjustable base

€ 490

Base with width adjustment up to 80 cm / 31 Inch and 400 kg / 881 Lb load capacity. It's useful to make the loading base larger when moving large items. It applies to Domino Automatic only.

Wheeled base

€ 570

Wheeled base with 4 wheels for easier operation on flat ground. 400 kg / 881 Lb capacity. It applies to Domino Plasmoid and Skipper Plasmoid.

Aluminium ramp

€ 590

Aluminium ramp with 600 kg / 1.322 Lb capacity. Dimensions: width of 67 x 8 x 200 cm / 26 x 3 x 78 Inch, ideal for vans up to 1 m / 39 Inch tall.

Arm for van

€ 560

Central arm equipped with 2 swivel wheels. This optional has to be applied to the vertical frame of Domino Plasmoid. It can be used only in combination with the Aluminium Ramp for loading / unloading the vehicle. It's needed when the height of the load is similar to the van's clearance, therefore in order to be able to upload and download the cargo has to be kept inclines, otherwise it wouldn't fit into the van while on the Domino Plasmoid's base.

Base for narrow landings

€ 530

Base with 4 swivel wheels, 400 kg / 881 Lb capacity. With this optional it's possible to perform rotations on extremely tight landings. It applies to Domino Plasmoid only. The operator has to put this optional on the lading to overcame, then drive the Domino Plasmoid on top of it, then finally perform the rotation with the 4 wheels instead of the tracks. It jumps over the first step of the next flight with remarkable space savings.

Tilted base

€ 690

Tilted base with 4 swivel wheels, back wheels with brakes. This optional is made for loading on a vehicle with celing restrictions. With Domino Plasmoid the operator drives on to this optional untill the height of the van is met. Then the operator can slide the load from the Domino base inside the van. Ideal for loads with similar dimensions to the total clearance of the loading deck of the van.

Fastening strap

€ 80

Fastening strap with ratchet for stair climbers mod. Skipper, Domino Plasmoid, Buddy and Buddy Lift. It's needed to secure the load

Additional battery Skipper

€ 490

Box of spare batteries to interchange with the box supplied to extend the battery life of the stair climber.

Battery charger Buddy and Buddy Lift

€ 350

Battery charger for stair climber mod. Buddy and Buddy Lift.

Battery charger Domino Plasmoid, Skipper, Buddy and Buddy Lift Plasmoid

€ 350

Battery charger for stair climber mod. Domino Plasmoid, Skipper Plasmoid, Buddy Plasmoid and Buddy Lift Plasmoid.

Additional battery Domino Plasmoid

€ 490

Box of spare batteries to interchange with the box supplied to extend the battery life of the stair climber.

Fastening strap Domino People

€ 60

Fastening strap for Domino People. It's needed to secure the wheelchair on the Domino People base.

Additional battery Domino People

€ 490

Box of spare batteries to interchange with the box supplied to extend the battery life of the stair climber.